[ Return ]

Epoxy Surface Plate
" When Accuracy Matters "

Do-it-Yourself Surface Plate

SHOP CHECK LIST

Precision Epoxy Products
a division of : Rock Art, Ltd.
4279 Midway Drive
Douglasville, Georgia 30134

Phone : (770) 489-0340

You must set-up a Mixing Shop beside the Plate area to stage and mix epoxies, to access application tools and to prepare and cleanup as needed. The shop should be approximately 10' x 20' in size with plastic and cardboard as a sub-floor to protect existing flooring from spills and/or splatter. The following are materials, tools and items you need to have available in your mixing shop to enable a smooth work flow.

Also see  Plate Order Form  for additional information.

Job Name : ____________      Job Size : ____________

Materials :

• _____ SG-25 or FG-100 (mix ratio 1:1 / A:B)  Floor prep 1/2" x 1/2" @ 55 feet per gallon

• _____ IG-100 (mix ratio 1:1 / A:B)  Primer and Fiberglass @ 125 square feet per gallon

• ______ FP-85 (mix ratio 2:1 / A:B)  Base coat pour @ 6.4 square feet per gallon

• ______ FP-85 (mix ratio 2:1 / A:B)  Color coat pour @ 8.5 square feet per gallon

• ______ FP-80 (mix ratio 2:1 / A:B)  Clear coat pour @ 8.5 square feet per gallon

• _____ Santex Access Ramp (Sand; binder and sealer epoxy) 12 feet per kit

• _____ Xylene or Xylol solvent (clean-up)

Accessories :

• ______ Instructional Video

• ______ Sub-floor prep / cleaning equipment

• ______ Chalk lines and chalk

• ______ Perimeter temporary forming material

• ______ Epoxy measuring ladle and bucket set with spatulas

• ______ Drill motor for mixing (heavy duty)

• ______ Hammer drill (small) and 3/16" masonry bits

• ______ Hammer Drill (large) and 1/2" masonry bit

• ______ 15" to 17" rotary floor buffer machine with sanding attachment

• ______ Sand paper for buffer unit (20-3 1/2 grit)

• ______ Industrial vacuum cleaner

• ______ Permanent form work, 3/16" x 1/2" 'L' angle Zinc strips

• ______ Form work mounting screws and anchors

• ______ Paint Brushes

• ______ 4" roller frame and covers

• ______ 9" roller frame and covers

• ______ Spiked roller 9" or 18"

• ______ 24" Gauge rake

• ______ Spiked shoes

• ______ Fiberglass tape

• ______ Roller extension handles (6' and 12')

• ______ Mixing pails (5 gallon and 1 gallon)

• ______ Propane; propane tips and poles

• ______ Mixing blades (5" single and double)

• ______ Concrete trowel (Marshall Ultra Light 14"x4")

• ______ Trowel tray; carpet and thinner

• ______ 1/2" copper grounding tape

• ______ decal spatula

• ______ 1/2" x 8' grounding rod

• ______ 1/8" copper wire

• ______ 1/8" wire clips

• ______ Trash buckets

• ______ Roll of plastic

• ______ Drop cloth or cardboard (for shop floor protection)

• ______ Extension cords (commercial type and clean)

• ______ Knee pads

• ______ Gloves (brown jersey)

• ______ Denatured alcohol

• ______ Tack rags (clean and lint free)

• ______ Tape (masking and duct)

• ______ Paper towels

• ______ Brooms (regular and push type)

• ______ Shovel (flat blade) and dust pan

• ______ Additional lighting and/or portable heater (if needed)

• ______ Miscellaneous hand tools (hammer, chisel, margin trowels, spackling blade, etc.)

• ______ Measuring tapes

• ______ Drill driver

• ______ Vinyl decal to be laminated in plate

Also see  Plate Order Form  for additional information.

[ Return ]

Copyright 2010 Rock Art, Ltd.

Precision Epoxy Products
4279 Midway Drive
Douglasville, Georgia 30134
(770) 489-0340