Precision Epoxy LogoPrecision Epoxy Logo

Precision Epoxy Products
"Your Complete Epoxy Source”

division of: Rock Art, Ltd.
 "Professionals of Epoxy Applications” ™
 

 

 
Epoxy Products List


If you cannot find what you are looking for,
Give us a call
If it is Epoxy related, we can help

 


Precision Epoxy / Rock Art specializes in the Epoxy Industry and through this combined effort as Formulator / Applicator, we have developed our systems to cater to the needs of 'Field Use'. As conditions and climate change from job to job, so do our techniques and formulas and these changes give more control and consistency, assuring the best and most permanent installations possible.

Important to understand about true Epoxies: There are four phases that an epoxy goes through once the Resin (Part 'A') and the Hardener (Part 'B') are properly blended at the appropriate mix ratio.
 

1)   Pot Life
    Pot life is the shortest time in an Epoxy's cure cycle because of exothermic reaction. Exotherming is where the epoxy's rate of cure is accelerated from its own heat build-up while being in a confined area, such as the container or 'pot', it was mixed in. If the pot life is reached and the batch is blown, it will be unusable and need to be discarded.

2)   Open Time
    Open time is how long you have to do additional work or applications with or into the epoxy after it has been applied such as release air, broadcast aggregate, etc. This is a much longer time than Pot Life because generally the epoxy is applied in a thin film over a large area allowing heat generated during curing to dissipate and not accelerate the cure rate.

3)   Cure Time - Initial
    Initial cure time is when the epoxy is no longer tacky and feels dry to the touch.

4)   Cure Time - Final
      Final cure time is when the epoxy reaches its solid state properties and curing is complete.

 


The following are our standard Epoxy Products.
We also offer Modified Versions and Custom Formulations


All mix ratios are by volume

 

·   Flooring Epoxies are used as the binder epoxy or the wear coat epoxy for our various flooring applications. These resins (Part 'A') can be used with either the Summer Cure or Winter Cure hardeners (Part 'B') for a controlled rate of cure at the given application temperature.

·      FS-190  (mix ratio 2:1 / A:B)
Floor Sealer Epoxy is a high strength, water clear system for use as a roller applied sealant in Industrial Flooring, Quartz Flooring, Interior Riverstone Flooring and Broadcast Flooring applications. FS-190 is extremely durable, chemical resistant and can be used as a commercial grade Decoupage System or a Santex binder epoxy.

·      TC-200  (mix ratio 2:1 / A:B)
Top Coat Epoxy is a pigmented, high strength, high build thixotropic industrial floor finish. It is extremely durable, chemical resistant with excellent scratch and impact resistance, applied by brush/roller, squeegee or airless sprayer. Available in 14 standard colors with custom colors available upon request. TC-200 can be used as a colored Santex binder for troweled systems.

·      MBC-200 (mix ratio 2:1 / A:B)
Metallic Base Coat Epoxy is a pigmented primer/base coat for the Metallic Epoxy Floor System. It is designed with a lower viscosity for better leveling and is applied by the squeegee and back roll method at 12 to 18 mils. A higher pigment percentage allows for no bleed through in a one coat application.

·      MFS-190 (mix ratio 2:1 / A:B)
Metallic Floor Sealer Epoxy is the cosmetic color coat of the Metallic Epoxy Floor System. The metallic pigment is added as desired and the MFS-190 is applied by the squeegee and back roll method to the desired design pattern. This system also incorporates de-air additives and has excellent leveling capabilities.

·      SFC-195 (mix ratio 2:1 / A:B)
System Final Coat Epoxy is the finish clear coat for the Quartzite and Color Flake floors. It is also used  in conjunction with the TC-200 and Metallic floors that require a final clear coat. This extremely low viscosity system also incorporates de-air additives and has excellent leveling characteristics and can be applied as an add-on top coat to restore an older existing floor system.

 

FS-190 Floor Sealer Epoxy over tile floor

 


 

·   Leveling Epoxies are used for our perfectly level applications from Epoxy Surface Plates to Precision Air Bearing Floors to CNC Lineal Rail to Table Top applications.

·      FP-80  (mix ratio 2:1 / A:B)
Floor Plate Epoxy is a clear self-leveling system for use in Surface Plate applications. This system is extremely hard and can be used in industrial laminating applications that have harsh or punishing environments.

·      FP-85  (mix ratio 2:1 / A:B)
Floor Plate Epoxy that is the pigmented version of the FP Series Epoxies for use in Surface Plate applications. Available in 14 standard colors with custom colors available upon request. Both Floor Plate Epoxies are extremely durable, chemical resistant with excellent scratch and impact resistance.

·      FP-90  (mix ratio 2:1 / A:B)
Floor Plate Epoxy that is designed for use in the Aerospace Industry Test Bed applications. This 100% solids, zero VOC system, has a very slow rate of cure to achieve the most level and flat surface area possible. The FP-90 provides a perfect surface that is unmatched and allows for the floating of air bearing devices with little to no drift while using minimal air pressure. Available in Black.

·      SC-15N  (mix ratio 2:1 / A:B)
Steel Casting Epoxy Natural is a clear system formulated for use in machine shops for leveling a wide variety of applications from table tops to linear rail mounting platforms. It offers unparalleled adhesion to properly prepared steel surfaces without delamination. SC-15N is very durable, chemically resistant and is a poured application with advanced leveling characteristics for extreme accuracy. This version is used for laminating surfaces that may need to be visible under the epoxy overlay.

·      SC-15P  (mix ratio 2:1 / A:B)
Steel Casting Epoxy Pigmented is a colored system formulated for use in machine shops for leveling a wide variety of applications from table tops to linear rail mounting platforms. The standard color is 'Black' but, it can be pigmented to a color of choice and is excellent for hiding substrate surfaces. It offers unparalleled adhesion to properly prepared steel surfaces without delamination. SC-15P is very durable, chemically resistant and is a poured application with advanced leveling characteristics for extreme accuracy. This version is pigmented to allow for additional de-air additives which makes this system a less technical application than the SC-15N.

·      DECO  (mix ratio 1:1 / A:B)
Decoupage Epoxy is a clear self-leveling system designed for laminating bar tops, table or counter tops, pictures, art work, clocks, cypress, etc. This system offers a slow rate of cure making it ideal for the novice user or for tedious application environments where more time is helpful.

 

 


 

·   Stone Bond Epoxy Series  is used as the binder epoxy for troweled porous exterior Riverstone Decking applications. Stone Bond resins (Part 'A') can be used with either the Summer Cure or Winter Cure  Stone Bond hardeners (Part 'B'). Stone Bond epoxy resins are designed to maintain the correct troweling viscosity at the given application temperature. Stone Bond hardeners are designed to give a desired rate of cure at the application temperature. Stone Bond is also suitable for exterior Industrial Flooring and Quartz Flooring applications exposed to direct sunlight. Stone Bond can also be used in special application variations as the binder of choice for Santex Flooring, Patching or Substrate Modifying Systems. Stone Bond Epoxies will cure out clear in the presence of moisture.
·      SB-30  (mix ratio 2:1 / A:B)
Stone Bond Epoxy with suggested application temperature of 20 to 40 degrees F

·      SB-40  (mix ratio 2:1 / A:B)
Stone Bond Epoxy with suggested application temperature of 35 to 50 degree
s F
·      SB-50  (mix ratio 2:1 / A:B)
Stone Bond Epoxy with suggested application temperature of 40 to 65 degrees F

·      SB-60  (mix ratio 2:1 / A:B)
Stone Bond Epoxy with suggested application temperature of 60 to 80 degrees F

·      SB-65  (mix ratio 2:1 / A:B)
Stone Bond Epoxy with suggested application temperature of 75 to 95 degrees F

·      SB-95  (mix ratio 2:1 / A:B)
Stone Bond Epoxy with suggested application temperature of 90 to 115 degrees F

·    Note: Stone Bond Epoxy  is a Registered Brand Name of Rock Art, Ltd. (registered in 1986). Accept no substitutes of inferior products by companies that try to represent themselves as equals by using the term 'Stone Bond Epoxy'

·      DS-190  (mix ratio 2:1 / A:B)
Deck Sealer Epoxy is a sealant for exterior Epoxy Riverstone Decking applications that have aged due to UV degradation from exposure to direct sunlight and/or excessive foot traffic. DS-190 restores the  high gloss beauty of the original decking along with maintaining the decks structural integrity. Being a fluid system, it is easily applied by brush and roller or airless sprayer after deck has been pressure washed and allowed to dry. This system has all the advantages of the Stone Bond Epoxies.

 

Riverstone Decking on Patio using Rock Art's Stone Bond Epoxy

 



·    Smooth Webbing Epoxy Series is used for the lamination of the normally porous Riverstone Decking overlays to achieve a non-porous Riverstone Flooring for indoor use and to satisfy local health department regulations. The SW Series Epoxies are selected according to their vertical hold range differences that are needed to properly laminate small, medium or large stone installations at a given application temperature. All the SW Epoxies are available with Summer Cure or Winter Cure hardeners.
·      SW-10  (mix ratio 3:1 / A:B)
Smooth Webbing Epoxy for lamination of smaller size stone (3/16 to 1/4 inch) overlays.

·      SW-20  (mix ratio 3:1 / A:B)
Smooth Webbing Epoxy for lamination of medium size stone (1/4 to ½ inch) overlay
s.
·      SW-30  (mix ratio 3:1 / A:B)
Smooth Webbing Epoxy for lamination of larger size stone (3/8 to 3/4 inch) overlays. Also used with small or medium stone formed vertical applications such as step risers, wall base, cantilever pool copings, etc.

 


 

·      Specialty Epoxies are used for specialized and/or specific applications.

·      DECO  (mix ratio 1:1 / A:B)
Decoupage Epoxy is a clear self-leveling system designed for laminating bar tops, table or counter tops, pictures, art work, clocks, cypress, etc. This system offers a slow rate of cure making it ideal for the novice user or for tedious application environments where more time is helpful.

·      IG-100  (mix ratio 1:1 / A:B)
Injection Grout Epoxy is a flexible, extremely fluid system with a very slow rate of cure for use as a penetrating primer for most of our flooring and decking systems. IG-100 is also used with injection equipment for concrete vertical or horizontal crack repair where motion or thermal shock is anticipated.

·      IG-3  (mix ratio 2:1 / A:B)
Injection Grout Epoxy is a high strength, extremely fluid system with a rapid rate of cure for use with injection equipment for concrete vertical or horizontal crack repair. IG-3 has excellent resistance to moisture and chemical environments making it an excellent binder for Santex or Slurry coat applications.

·      FL-115  (mix ratio 1:1 / A:B)
Flexible Laminating Epoxy is used in conjunction with our special fiberglass cloth tape for preparation of cracks, seams, cold joints or expansion joints in substrate. This process eliminates or helps reduce the risks of these points of movement in substrate from telegraphing back through what ever decorative over-lay is finally applied to substrate. FL-115 also produces a flexible, self-leveling, waterproofing membrane in poured application
s.

·      VP-110  (mix ratio 1:1 / A:B)
Vertical Primer Epoxy is a non-sagging thixotropic paste for use as a vertical primer on areas receiving troweled overlays such as cove base installations. This system has good tensile elongation to absorb thermal movement, extended open time for tedious applications and can be applied by brush or roller.

·      CC-32  (mix ratio 1:1 / A:B)
Cold Cure Epoxy is a high strength clear system for use as a flooring sealant at extremely cold application temperatures. Suitable as a Santex binder and Slurry Coat epoxy, this system has outstanding durability and chemical resistance.

·      D50-50  (mix ratio 2:1 / A:B)
Cold Cure Epoxy is a high strength clear system for use at extremely cold application temperatures. This system was originally formulated to satisfy the need to do concrete repair work in a large freezer food storage warehouse that maintained a temperature of -20 degrees F. This system has a very short pot life and open time and must be used and mixed in colder environments.

·      TS-65  (mix ratio 2:1 / A:B)
Tank Sealer Epoxy is a fluid thixotropic system for flood coating or roller coating horizontal areas to create a waterproofing membrane in storage tanks or containment areas made of concrete, steel, fiberglass or aluminum. TS-65 has a high bond strength, is very durable and chemically resistant. Available in Summer Cure and Winter Cure versions.

·      TS-75  (mix ratio 2:1 / A:B)
Tank Sealer Epoxy is a non-sagging paste system for roller coating vertical and overhead areas to create a waterproofing membrane in storage tanks or containment areas made of concrete, steel, fiberglass or aluminum. TS-75 has a high bond strength, is very durable and chemically resistant. Available in Summer Cure and Winter Cure versions.

·      TS-75 P  (mix ratio 2:1 / A:B)
Tank Sealer Epoxy is the same as TS-75 except for being pigmented, generally white, to give second coat applications a different appearance to eliminate applicator error such as holidays in the waterproofing membrane being applied.

 

Water feature in Model Train Lay-out using Rock Art's Specialty Epoxies

 



·    Structural Gel Epoxy Series is a rigid high strength system used in vertical or filler applications and for structural bonding of similar or dissimilar materials. This system is used as the matrix membrane for vertical exposed aggregate wall systems or as a primer for formed vertical Riverstone Decking installations such as pool copings and step risers. Suitable for crack sealing in conjunction with injection grouting where a rigid system is desired. The SG Series epoxies are selected to suit the application environment and temperature. Both components of these systems are gel consistency which makes measuring and mixing extremely easy and error free.
·      SG-22  (mix ratio 1:1 / A:B)
Structural Gel Epoxy - 22 has the fastest rate of cure and lowest viscosity for use in cold weather environments
.
·      SG-23  (mix ratio 2:1 / A:B)
Structural Gel Epoxy - 23 has an accelerated rate of cure and medium viscosity for use in cool weather environments.

·      SG-25  (mix ratio 1:1 / A:B)
Structural Gel Epoxy - 25 is the most used of the SG Series with a slow rate of cure and normal gel viscosity for use in average weather environments.

·      SG-25 T  (mix ratio 1:1 / A:B)
Structural Gel Epoxy - 25 T is a thicker version of the SG-25 system for use at higher application temperatures and for use with larger aggregate in vertical exposed aggregate installations.

·      SG-27  (mix ratio 2:1 / A:B)
Structural Gel Epoxy - 27 has the slowest rate of cure for use in hot weather environments or tedious applications where more open time would be useful.

 


 

·    Flexible Gel Epoxy Series is a high elongation, non-sagging system that produces a waterproofing membrane for expansion joints, cracks, seams and cold joints. Suitable for crack sealing in conjunction with injection grouting where movement or expansion and contraction are present. Creates a flexible mortar mix when blended with an equal volume of sand.
·      FG-100  (mix ratio 1:1 / A:B)
Flexible Gel Epoxy with an elongation factor of 100% and a higher heat distortion factor than the FG-125. The FG-100 system is also available in both the summer cure and winter cure versions widening its application temperature range. This system would be used in applications exposed to the elem
ents.
·      FG-125  (mix ratio 1:1 / A:B)
Flexible Gel Epoxy with an elongation factor of 125% and a lower heat distortion factor than the FG-100. The FG-125 system is designed for substrate preparation and waterproofing applications that will be covered with decorative overlays.

 

CFZ Expansion Joints in Stone Bond Epoxy Decking and SG-25 Vertical Exposed Aggregate
 

 


 


·     Rigid Casting Epoxy Series  is a fluid system used for structural bonding, laminating, art casting, electronics potting, etc. The RC Series epoxies are selected to suit the application environment and temperature. They are available in thick or thin viscosity versions to suit a wide range of applications and rates of cure. These systems are non-conductive, high strength, high heat distortion, self-leveling epoxies and are available in clear or pigmented versions.
·      RC-52  (mix ratio 1:1 / A:B)
Rigid Casting Epoxy - 52 is the 'Fast Cure' of the series for specialized applications. This system has a pot life of ten minutes and reaches handling strength in one hour at 77 degrees F.

·      RC-53  (mix ratio 2:1 / A:B)
Rigid Casting Epoxy - 53 is for use in applications requiring a rapid cure or for use at lower application temperatures. This system has high strength properties without being brittle, making it ideal for specialized casting.

·      RC-55  (mix ratio 1:1 / A:B)
Rigid Casting Epoxy - 55 is the most widely used of the RC series. The 45 minute pot life at 75 degrees F seems to make it suitable for a wide range of applications
.
·      RC-57  (mix ratio 2:1 / A:B)
Rigid Casting Epoxy - 57 has the slowest rate of cure for use at higher application temperatures or tedious applications where more open time would be useful.

·      RC-190  (mix ratio 2:1 / A:B)
Rigid Casting Epoxy - 190 is a special 'Armor Plating' formulation to satisfy special needs of the electronics potting industry. This system is extremely hard and durable making it virtually impossible to be broken down to reveal circuitry within the casting. Available in a thick black color to further hide contents within the casting.

 

Linear Rail Leveling using Rock Art's Casting Epoxies

 



·    Deep Casting Epoxy Series  parallel the Rigid Casting Series Epoxies. The DC Series epoxies contain a filler to eliminate 'Boiling' in large deep (3/4" plus) pours and are selected to suit the application environment and temperature. They are available in thick or thin viscosity versions to suit a wide range of applications and rates of cure. These systems are non-conductive, high strength, high heat distortion, self-leveling epoxies and are available in opaque or pigmented versions.
·      DC-52  (mix ratio 1:1 / A:B)
Deep Casting Epoxy - 52 is the 'Fast Cure' of the series for specialized applications. This system has a pot life of ten minutes and reaches handling strength in one hour at 77 degrees F
.
·      DC-53  (mix ratio 2:1 / A:B)
Deep Casting Epoxy - 53 is for use in applications requiring a rapid cure or for use at lower application temperatures. This system has high strength properties without being brittle, making it ideal for specialized casting.

·      DC-55  (mix ratio 1:1 / A:B)
Deep Casting Epoxy - 55 is the most widely used of the DC series. The 45 minute pot life at 75 degrees F seems to make it suitable for a wide range of applications.

·      DC-57  (mix ratio 2:1 / A:B)
Deep Casting Epoxy - 57 has the slowest rate of cure for use at higher application temperatures or tedious applications where more open time would be useful.

 



·      Santex  is a sand filled epoxy system for use as a troweled industrial floor base or topping for leveling or sloping, a concrete patch or repair mortar for spall repair. Santex can be configured with different epoxy binders to achieve varied solid state properties to suit a variety of application needs. Sand and/or aggregate sizes  and blends can be varied to application needs and to fit the troweling circumstances. The general aggregate to epoxy ratio is 9 to 1.

Clich here for Santex Tech Bulletin in printable PDF format
 

·      Slurry Coat  is a sand filled epoxy system that has a soupy consistency that can be applied by trowel, squeegee or gauge rake. This is used to fill uneven, rough or spalling substrates by giving the self-leveling epoxy more volume as the aggregate filler settles into lower areas. Slurry Coat can be configured with different epoxies to achieve a variety of solid state properties to suit many application needs. The general aggregate to epoxy ratio is 2 to 1.

 

Precision Epoxy's shop set-up for Motorsports Surface Plate installation
 


Consult Product's Technical Bulletin for additional information

For the Do-it-Yourselfer using our Epoxy Products; Read The Following:

    A specific epoxy formulation should be chosen to satisfy your application requirements such as liquid and solid state properties, pot life, open time, cure time, exposure, etc.
    A particular epoxy product may have many proper applications throughout many industries; therefore, a clear understanding of epoxies, their applications and limitations will aid in proper product selection and use. An Epoxy's solid state properties can only be achieved by thorough mixing of Parts 'A' and 'B' at the proper mix ratio. Higher application temperatures will accelerate reaction time reducing pot life, open time and cure time while making the viscosity of the product thinner. Lower application temperatures will make reaction time sluggish extending pot life, open time and cure time while increasing the viscosity of the product.
    Every reasonable precaution is taken in the manufacture of all products and compiling of data to assure that they comply with ROCK ART'S exacting standards. Reliable tests and field experience of these products indicate their utility as described herein. The suitability of a product for an intended use shall be solely up to and the ultimate responsibility of the user/purchaser of that product. You must determine your reliability as an applicator for your specific application. We are not responsible if a product should be used by the user/purchaser in a manner to infringe any patent held by others.

    We assume no liability for damages of any kind and no guarantee of results is given using these products or data because every possible variation in the method of their use or conditions under which they are applied cannot be anticipated.

User accepts product "AS IS" and without warranties, expressed or implied.

 

Click here for a printable PDF version of this page
(large file may take a moment to upload)

 

Contact Precision Epoxy for Current Pricing on all Products Above

 

Buyer Beware !

Rock Art, Ltd was incorporated in 1979. I personally have been working with epoxies since 1965. Since that time we have had many ‘Fly-By-Night’ companies and individuals copy, impersonate, misrepresent and/or falsify their claims, operations and/or marketing efforts to fool the public into thinking they come even close to the experience, quality, reputation and/or job portfolio created by Rock Art,  Ltd. over the past 40 plus years.

Note: Precision Epoxy™  is a Registered Brand Name of Rock Art, Ltd. (registered in 1986). Accept no substitutes of inferior products by unauthorized companies that try to represent themselves as equals by using the term 'Precision Epoxy' in their name or products they offer. Rock Art, Ltd is the only source offering the true original performance that is ‘Precision Epoxy Flooring’.

Note: Stone Bond Epoxy™ is a Registered Brand Name of Rock Art, Ltd. (registered in 1986). Accept no substitutes of inferior products by companies that try to represent themselves as equals by using the term 'Stone Bond Epoxy'.

 


Precision Epoxy Products
division of: Rock Art, Ltd.
4279 Midway Drive
Douglasville, Georgia 30134
Phone: (770) 489-0340
Email: [email protected]
[email protected]

Notice: All Photographs and Text in this web-site are Copyrighted and are the sole possession of Rock Art, Ltd.
Any unauthorized use is strictly prohibited by law. Violations will be treated appropriately.